VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-18-2020, 01:57 PM
American Hot Rod American Hot Rod is offline
 
Join Date: May 2020
Location: Granite Bay, CA
Posts: 1
Default JPI EDM 930 auto dimming

Hello everyone,

I have an EDM 930 engine monitor that upon initialization defaults to 25%. Itís nearly pitch black and impossible to see outside. Itís supposed to default to 100%. I have sent the unit to JPI for a software upgrade( only option) and to fix the auto dimming. It worked for a bit. I looked at the installation manual and wiring pin diagram. I was hoping that I could reset the default without pulling the unit or to install a external dimmer thru the pins themselves. I did see that others had the opposite problem of going full bright at night but solved that with some tape over the sensor, lol. Iím hoping I donít have to send the unit back to them, plus they are closed until further notice due to Covid-19.

Thank you for any input!
Carl
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:34 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.