I thought that the way the aileron trim kit was setup for the wiring jack on the assembly was wrong so I decided not to try and route the wire via the supplied connector slot. I cant figure what the designer intended at all.
Then I got the audio jack that goes with the wiring harness and there is no way to pass the connector thru the audio jack hole if made up in advance. I have to pass the jack wiring down through the cover plate then thru the hole in the fuse crosspiece there then attach the plug that mates to the wiring harness. Thing is it is setup so you can?t take off the cover plate without cutting the audio wires even if you makeup that connector that supposedly would let you disconnect it.
Why is it done like that? I guess I don?t ever need to pull that panel.......
Then I got the audio jack that goes with the wiring harness and there is no way to pass the connector thru the audio jack hole if made up in advance. I have to pass the jack wiring down through the cover plate then thru the hole in the fuse crosspiece there then attach the plug that mates to the wiring harness. Thing is it is setup so you can?t take off the cover plate without cutting the audio wires even if you makeup that connector that supposedly would let you disconnect it.
Why is it done like that? I guess I don?t ever need to pull that panel.......