Originally Posted by seward747
Like others-interested in the Stewart Systems as well. Nice description of the priming process. Do you have a part # or name for that 3M gun? Nice lid set-up as well.
Will be interested in your further comments on the system; hope to check them out at OSH.
He put links in the description under the video. The accuspray is a nice system but you'll also need to pick up the PPS cups to go with it. You're looking at ~$300 to get started. The PPS 2.0 is a great system and saves on cleanup even with a regular gun.
It's right at $2/session to use the PPS cups vs regular measuring cups for ~$0.50 plus filters at ~$0.20. But cleanup goes from 5-10 min down to 1-2.
I've sprayed Stuart Systems on fabric. It's very very different than solvent born paint. Neither better nor worse. Just different. It was closer to spraying clear than anything else I've sprayed.