VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 04-03-2019, 07:30 AM
Pilot135pd's Avatar
Pilot135pd Pilot135pd is offline
 
Join Date: Jan 2019
Location: Ben Wheeler, TX
Posts: 397
Default

Quote:
Originally Posted by Sam Buchanan View Post
Here is the aforementioned MIG project:

Yep, definitely making one now, thanks for the picture !
__________________
RV-8 N52VM : Dynon D-180, GTX327, SL40, Garmin 496 GPS, AP74 Autopilot, Titan 0-360A1A2N, Nickel Coated Cylinders, 2 Slick mags (both impulse coupled), engine preheater, Hartzell Plane-Power alternator, Hartzell HC-C2YR-1BFP constant speed, blended airfoil

Exempt by 3 out of the 10 ways but I still donated.
Reply With Quote
  #12  
Old 04-03-2019, 07:53 AM
blueflyer's Avatar
blueflyer blueflyer is offline
 
Join Date: Nov 2008
Location: Shreveport, LA
Posts: 911
Default

Quote:
Originally Posted by Sam Buchanan View Post
I used 1/8".
Thank you.
Reply With Quote
  #13  
Old 04-03-2019, 08:27 AM
N941WR's Avatar
N941WR N941WR is offline
 
Join Date: Jan 2005
Location: SC
Posts: 12,277
Default

What those pictures don't show is that the cable wraps once around the horizontal part of gearl leg. My cable is sheathed in plastic.

I would modify Sam's design just a little bit by adding a gusset where the two pieces of bar stock come together. Especially if you don't trust your welds!
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
Reply With Quote
  #14  
Old 04-03-2019, 02:05 PM
Pilot135pd's Avatar
Pilot135pd Pilot135pd is offline
 
Join Date: Jan 2019
Location: Ben Wheeler, TX
Posts: 397
Default

Quote:
Originally Posted by RV8JD View Post
The OP is using the Handy-Jack. Below are the original instructions for reference.

(Click to enlarge)


(Click to enlarge)
Thanks, it's always helpful to see various views before building one.
__________________
RV-8 N52VM : Dynon D-180, GTX327, SL40, Garmin 496 GPS, AP74 Autopilot, Titan 0-360A1A2N, Nickel Coated Cylinders, 2 Slick mags (both impulse coupled), engine preheater, Hartzell Plane-Power alternator, Hartzell HC-C2YR-1BFP constant speed, blended airfoil

Exempt by 3 out of the 10 ways but I still donated.
Reply With Quote
  #15  
Old 08-14-2019, 04:23 PM
N941WR's Avatar
N941WR N941WR is offline
 
Join Date: Jan 2005
Location: SC
Posts: 12,277
Default


Is anyone making these now?

Asking for a friend.
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
Reply With Quote
  #16  
Old 08-14-2019, 05:34 PM
Northernliving Northernliving is offline
 
Join Date: May 2005
Location: Boston, MA
Posts: 168
Default Measurments

Quote:
Originally Posted by Sam Buchanan View Post
Here is the aforementioned MIG project:

Any chance you could get the measurements on this so that I don't have to guess?

Thanks.
__________________
Brian J.
Boston, MA
RV8 Based at ORH - Purchased
RV8 - The Dream - Under Construction
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:56 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.