PCU-5000X order form - how to fill out?

Looking for some help in filling out this form to order a PCU-5000X governor. I will be installing an a stock Van's IO-360-M1B engine and Hartzell BA prop.
Data needed:
- Governor Drive Ratio (I assume this will be 0.866:1)
- Control Lever Angle (I assume I can change this as needed)
- Control Lever Rotation (Clockwise or Counter-Clockwise)
- Pressure to increase (Yes or no?) for non-counter weighted props (which I assume I have).
- Pressure to Decrease (Yes or no?) for counter weighted props which I don't think I have.

Here is the actual form: http://www.aircraftspruce.com/catalog/pdf/pcu-gov-form.pdf

Thanks,
Carl

I?m still looking for this information

Someone must know.

Carl

I'd contact Max Paszkowski to get it right on the form at [email protected] or 847-541-1133 Ext 108.

He helped me when I bought a PCU5000 for my 540.

Or call them,
595 Telser Road
Lake Zurich, IL 60047 USA
TEL: 847-541-1133 FAX: 847-541-0176