What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon AP servo mounting kit

acam37

Well Known Member
Does Dynon make a (roll) servo mounting kit for the RV-4 wing? AC Spruce doesn't show to have one. If not, does anyone have a picture of how one is mounted in the wing? I am not interested in mounting it in the fuselage unless absolutely no other options.
 
short answer, no. nobody makes a roll mount for the 4. search the list, there are some good pictures of how people have solved the question. the tru-trak servo mount has been used for some of the installations in the past.

bob burns
RV-4 N82RB
 
Last edited:
Check with TRIO, I got my wing servo kit from them .... it lists as for RV4-6 .... I bet it will work with the dynon servo as well.
Thanks,Mike

Arlie, PM or email me for pics of my install/pics of the trio in my -4 .... Thanks,Mike
 
Last edited:
I mounted my servo just to the the right of the front control stick on the inside of the bulkhead to the right of the stick. I built a tab and bolted it to the control fixture that the stick connects to. I was unable to find a picture of it installed but here are some of the mount I built.

IMG_0025-e1496326898182.jpg

IMG_0029-e1496325515440.jpg

IMG_0027-e1496327076340.jpg

IMG_0026-e1496326009702.jpg

IMG_0028-e1496325645253.jpg
 
The Dynon 6 roll mount works great in the fuselage. Just have to fab a clamp for the control tube.

IMG_2104_1.jpg
[/URL][/IMG]
 
Back
Top