Workbench height for RV-14 tail kit (empennage)
I'm getting ready to build two EAA workbenches for my basement shop I've been preparing. Here is my question.... The standard workbench height is 33 inches, the height of my basement is 93 inches. If I build the standard work bench will there be enough height above the table to compete the empennage kit (60 inches from the top of the bench to the ceiling). In the builder logs, it looks like you need some height when completing the empennage. If this is not enough height, any other options I should consider like shorter workbenches. I'm 6'3 and would like to keep the bench height as high as possible. Many thanks in advance for your help....
I'm getting ready to build two EAA workbenches for my basement shop I've been preparing. Here is my question.... The standard workbench height is 33 inches, the height of my basement is 93 inches. If I build the standard work bench will there be enough height above the table to compete the empennage kit (60 inches from the top of the bench to the ceiling). In the builder logs, it looks like you need some height when completing the empennage. If this is not enough height, any other options I should consider like shorter workbenches. I'm 6'3 and would like to keep the bench height as high as possible. Many thanks in advance for your help....
Last edited: