kelleyclark
Member
I just wanted to share the results of my Team Aerodynamix LED Landing Light, Nav/Strobe installation on my RV-7. I originally purchased a complete lighting system from Van's years ago. After a recommendation from a friend and researching LED lighting systems, I selected Team Aerodynamix's kit. The instructions were easy to follow and the kit provided all needed items. We did have to do some work on the rudder fairing to allow the tail Nav/Strobe assembly to fit. I used two Landing lights (instead of a landing and taxi light) wired with a wig-wag relay provided by Team Aerodynamix. I will be selling my original unused system from Van's in the future.
Hole cut for the the landing light. There is one in each wing wired with a three position switch and a wig-wag relay
Nav/strobe mounting bracket installed in wingtip
LED landing light mounted
LED Nav and Landing Light illuminated
Additional fiberglass added to rudder fairing to accommodate Nav/Strobe assembly
Hole cut for the the landing light. There is one in each wing wired with a three position switch and a wig-wag relay
Nav/strobe mounting bracket installed in wingtip
LED landing light mounted
LED Nav and Landing Light illuminated
Additional fiberglass added to rudder fairing to accommodate Nav/Strobe assembly
Last edited: