VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 10-28-2018, 01:11 PM
Mike_Singer Mike_Singer is offline
 
Join Date: Oct 2018
Location: Mission Viejo, CA
Posts: 4
Default RV-7 Dimensions

Hello,
First post here... I have been doing lots of research between the 7 &14. I think I have decided on a 7 quick build. Does anyone have the measurement from the firewall backward to the empennage? I am looking to build this portion in a 1 car garage that is 21 ft long and then move to the 2 car garage once it doesn't fit.
Reply With Quote
  #2  
Old 10-28-2018, 03:11 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,003
Default Measurement

Firewall flange to end of the fuse skin 174-1/2"
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #3  
Old 10-28-2018, 03:13 PM
rv7charlie rv7charlie is offline
 
Join Date: May 2006
Location: Pocahontas MS
Posts: 3,152
Default

The fuselage from tailwheel to prop flange will fit inside of 21'.
http://www.vansaircraft.com/public/rv7specs.htm

My primary build space is roughly 21' x 24', and has ~5x6 foot corner removed for a restroom. It has 2' deep shelving filling one long wall. It has 2 large rolling tool boxes, and a ~4x5 foot work table on the other long wall (same side as the restroom).

FWIW, smaller can sometimes be an advantage; you tend to keep your tools close. It's amazing how much time you can burn just walking for a tool.

Charlie
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:19 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.