VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 11-08-2018, 05:22 PM
Mike_Singer Mike_Singer is offline
 
Join Date: Oct 2018
Location: Mission Viejo, CA
Posts: 4
Default Newbie Here

Hi All,
I am new to the build scene and have some questions that might sound dumb... I am very interested in building a plane but it all seems a bit overwhelming. I ordered the toolbox kit to see what skills are required to assemble something small before investing a considerable amount of time and $$. The kit has a few terms I am unfamiliar with. Is there anything in writing or videos that someone can refer to while learning the skills needed to complete a build. Cleco, Deburr, Dimple, are just a few that I spent some time researching but couldn't get clear answers on.
Reply With Quote
  #2  
Old 11-08-2018, 05:32 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,313
Default Welcome to VAF

Quote:
Originally Posted by Mike_Singer View Post
Hi All, I am new to the build scene
Mike----Welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 11-08-2018, 06:16 PM
CJ in EP CJ in EP is offline
 
Join Date: Apr 2017
Location: Eden Prairie, MN
Posts: 27
Default Highly recommend the EAA class

I too was a bit apprehensive until attending the EAA sheet metal class. I found the instruction to be invaluable and a great confidence builder.
__________________
Chris Hrabe
Eden Prairie, MN
RV-9A
Finishing Engine / Starting Panel
Reply With Quote
  #4  
Old 11-08-2018, 06:18 PM
dwranda dwranda is offline
 
Join Date: Jan 2015
Location: Jamestown,NY
Posts: 370
Default

Watch all of the training videos on the EAA website.
__________________
9A in progress
Working on Finish kit!!
Mattituck TMXIO-360 red gold
Dues paid Dec 17
Reply With Quote
  #5  
Old 11-08-2018, 06:32 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,000
Default Videos

Yep. EAA Webinars. That should get you past the visual basics. Then move on the a training class.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #6  
Old 11-08-2018, 06:38 PM
rolivi's Avatar
rolivi rolivi is offline
 
Join Date: Feb 2015
Location: Fort Worth
Posts: 475
Default

And find a chapter near you!
__________________
Rob
RV-6A (Purchased)
2018 Dues Paid
Reply With Quote
  #7  
Old 11-08-2018, 08:08 PM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 3,586
Default

Van's support page, for updates and revisions and that sort of thing, has Chapter 5 that you can download for each of the aircraft. It's a common document shared among the planes It's a good description of some of the tasks.

Dave
Reply With Quote
  #8  
Old 11-09-2018, 07:07 AM
BrianDC's Avatar
BrianDC BrianDC is offline
 
Join Date: Mar 2016
Location: Northern VA
Posts: 125
Default

First, you don't have to have any previous experience to build. TRUST ME!

As others have said, if you are excited about the thought of building and want to get a sense of it, see if you can register / attend one of the EAA sheetmetal classes (or any of the other ones for that matter!).
There are also TONS of YouTube videos of new builders showing what they are doing (including the mistakes they make). Half of the process is learning from those mistakes and gaining skills.

Look up a local EAA chapter and see if you can visit another builder to see what they are working on. I know I did before I purchased my tail kit.

Welcome to VAF!
__________________
Brian Lester
RV10 - #41778
Empennage - Done (for now)
Wings - in progress
RV10builder.com
PPL / IR - KVKX / KHEF
Reply With Quote
  #9  
Old 11-09-2018, 12:01 PM
Mike_Singer Mike_Singer is offline
 
Join Date: Oct 2018
Location: Mission Viejo, CA
Posts: 4
Default

Appreciate the info! Looks like I just missed the local class that appears to be annual (In Corona). Might just have to fly out to Phoenix to attend the one in a few months.
Reply With Quote
  #10  
Old 11-12-2018, 03:44 AM
GeoffP GeoffP is offline
 
Join Date: Sep 2018
Location: Warrimoo, NSW, Australia
Posts: 8
Default

I'm fairly new here too, and some of the tasks only seemed daunting because they're new to me. As suggested I read through section 5 of the vans manual (after making a few mistakes along the way so then it hit home as to what was important!), but I also checked out a lot of the support videos on the VAF advertisers sites - Cleaveland and Steinair have some really useful things.
__________________
RV-9, just started on the Empennage.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:09 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.