My tires wear unevenly, and I understand that this is normal. As I recall they wear consistently with other RV-6 that have landing gear that were factory drilled. I can't recall, however which way they wear. According to my notes they wear out the outboard side of the tire. A couple of months backed I rotated the tires to even out the wear, and now there are no treads on the outside of the tire. I have tread left on the inside, but just want to verify that this is correct before I either rotate these tires or replace them.
Thanks for your help.
JLudwig
N925JL
22439
Thanks for your help.
JLudwig
N925JL
22439