Greetings,
I am swapping out my carb for my O-320.
Going from a 5009N to the 5217 (MA4SPA).
I was running the old carb since flight in 2000.
I was curious to see what the standard/recommended hardware setup was for the carb-to-oil pan nuts.
Here?s what I had before, from top to bottom:
Flat AN960 washer
Internal star/lock washer
Coarse-thread nut
Thin, stamped metal lock nut (can?t recall the part number)
Any comments?
Thanks
I am swapping out my carb for my O-320.
Going from a 5009N to the 5217 (MA4SPA).
I was running the old carb since flight in 2000.
I was curious to see what the standard/recommended hardware setup was for the carb-to-oil pan nuts.
Here?s what I had before, from top to bottom:
Flat AN960 washer
Internal star/lock washer
Coarse-thread nut
Thin, stamped metal lock nut (can?t recall the part number)
Any comments?
Thanks