Shyview autopilot & knob panel wiring harness

Hello everyone

Anyone know where I can find the instructions on how to build these harnesses??

Look on the Dynon web site and couldn,t find them...They must be buried somewhere...

Thanks

Bruno
[email protected]
-----------------------------------------------------------
UPDATE: Sure enough, as soon as I put a post here, I found the darn things...Disregard previous post..

The knob panel only needs the Skyview network cable.

Wiring should be all detailed in the Installation Guide. Look at Chapter 18 and 19.

For basic functionality you just need network cables and a place to hook them up. They both have 2 network ports, so you can unplug an existing cable and daisy chain the two modules in. Of you want the trim functions, you can do so with the AP panel with fairly simple wiring.