BLittleton
Active Member
I know this has been asked lots of times, but I can't quite find this answer. I've decided to tackle the emp tips while waiting on the weather to warm up for the canopy.
I used insulation foam board to block in the tips and covered and shaped with West Systems 410 micro and resin. I'm quite happy with the shape and gaps of the elevators and HS.
My question is do I need to put a layer of glass over the micro or will a glaze or resin suffice? I plan to wrap someday if that makes any difference. Pics below, thanks for any advice.
I used insulation foam board to block in the tips and covered and shaped with West Systems 410 micro and resin. I'm quite happy with the shape and gaps of the elevators and HS.
My question is do I need to put a layer of glass over the micro or will a glaze or resin suffice? I plan to wrap someday if that makes any difference. Pics below, thanks for any advice.