Skyview EGT L/R reversed?

I have an intermittent open circuit in the Right EGT connection. In the process of trouble-shooting the problem, I discovered that the Right and Left EGT wiring in the harness are reversed.

I'm wondering if I have a rouge harness or do others have the same wrong wiring. If you don't have problems, the only way to find out is by disconnecting one probe and associating it with the display.

Of course, it can be easily solved, as I did, with software assignment.

Regards,

Rafael

Mine were also reversed but it was for the D180.

There is a history...

Mine too were reversed and BigJohn also reported same some time back. Hal and I relabeled and swapped the connectors on top of the motor. I remember BigJohn swapped the pins in the D-Sub. These were all D-180 planes, I don't know if we could do it with a software assignment.

Tony