What is the torque for the hex 1/4-20x3/4 bolts that fasten the snorkel to the FM-150? Is there a value, snug, or ????
Also the washer in the plans is called out as a nas1149fo332p which I think is for an an3 or #10 size. I found some 1/4 washers in the bags and used them but they aren?t as thin as the called out washers.
Once I get how tight nailed down I?ll safety wire.
Also the washer in the plans is called out as a nas1149fo332p which I think is for an an3 or #10 size. I found some 1/4 washers in the bags and used them but they aren?t as thin as the called out washers.
Once I get how tight nailed down I?ll safety wire.