I've installed and have been flying with the Garmin GSA28 autopilot servos /GDU 370 screen . It's been working great .....except 2 times it's giving me a message "Roll Servo/Pitch Servo Hardaware Fault " . Shut the avionics off and reboot it goes away . In the past Steve the G3 expert was the go to guy , I've emailed and been in contact with two other techs , given them the serial numbers to the servos but have been real slow about an answer . It's an intermittent problem that's not a huge problem but needs to be resolved .
Anyone else incur the same issue with their servos ? Mine were purchased Jan 2017 from Air Spruce .
Anyone else incur the same issue with their servos ? Mine were purchased Jan 2017 from Air Spruce .