VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-23-2017, 10:15 AM
Tsabean Tsabean is offline
 
Join Date: Oct 2014
Location: Nova Scotia
Posts: 13
Default Governor bracket interference


I have a Woodward governor on an O-320 that I am trying to mount on an RV4.
The governor fits nicely in the firewall cutout but the Vans attachment bracket interferes with the footwell bump out.
Not sure if the attached picture will work but all that is required would be to rotate the entire unit about 25 degrees or so.
Reluctant to remove the 6 screws, not sure what might jump out.
Any suggestions would be appreciated.
Cheers, Tom
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:59 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.