I can not find the material for the spacer blocks C-01441 on page 38-19 (RV-14A) for between the canopy to the roll bar. The plans give the width but not the thickness.
Would someone have one handy to measure and tell me the thickness of the blocks so I can make some?
I'm grateful, Larry
RV-14 tail, QB Fuselage, Finish kit, QB wings and FF kit, Thunderbolt 390 (in line for delivery), Hartzell C/S Blended Airfoil. Sill need to put it together... 90% left to go
Grateful to pay dues 19'