Another Nutplate question

[Mikeandmaz]

I’m working my way through the aft fuselage and yesterday countersunk the nutplate attachment holes in the Battery Angles. Reading ahead in the plans I have, I can’t see any use for these nutplates . I’m sure there is, probably in a following kit, but just interested in what they are for.
Waiting for enlightenment!
Mike

[mulde35d]

I believe you are talking about the holes that get used in Section 36 while installing the Elevator system push/pull tubes and bellcrank.

[RandyAB]

There are nutplates there for the master solenoid too.

[JTJones]

Also autopilot pitch servo (and yaw servo if you choose). Those plans pages sections (56/57/58, depending on brand used) will come with the installation kit. And forward of that there is room for some avionics - transponder for instance.

[Jake14]

They're called battery angles because they are the same part nos. used to support the battery in the RV-10. The RV-14 battery is on the firewall as are the solenoids. Those brackets also hold the elevator tube bellcrank and the pitch servo.

[Mikeandmaz]

Thanks for the replies, I’ll look forward to using them in a few years time.