Geico266
Well Known Member
"Issues" might not be the correct word, just needing some guidance. Hopefully, Lucas will read this and respond this weekend!
I installed a new Vision and it works great, just needs a little tweak & fine tuning. I have read the manual a couple of time with nothing I could find about these two issues.
1. Set on "Course Heading" or after hitting the "level" button, the AP wants to "wigwag" ever so slightly left to right. Very slow and gently. The plane is trimmed perfectly.
2. In GPSS mode (following a GPS course) or "Altitude Preselect" the unit wants to descend about 100' FPM no matter what I try. It will not hold the selected altitude.
Any suggestions?
The unit is "on a laser" flying an approach. It flew down to 200' minimums and held it there along the runway until I hit "Missed" , then it climbed to the hold pattern. Amazing!
I installed a new Vision and it works great, just needs a little tweak & fine tuning. I have read the manual a couple of time with nothing I could find about these two issues.
1. Set on "Course Heading" or after hitting the "level" button, the AP wants to "wigwag" ever so slightly left to right. Very slow and gently. The plane is trimmed perfectly.
2. In GPSS mode (following a GPS course) or "Altitude Preselect" the unit wants to descend about 100' FPM no matter what I try. It will not hold the selected altitude.
Any suggestions?
The unit is "on a laser" flying an approach. It flew down to 200' minimums and held it there along the runway until I hit "Missed" , then it climbed to the hold pattern. Amazing!
Last edited: