Originally Posted by Boyd Birchler
I wonder if anyone has taken the method used for some car window motors. On Toyota's the window motor shuts off when the running amperage goes up,IE when the window gets to the end of it's travel, in that instant the amperage jumps. The switch has a sensor that sees that increase and cuts the power.
Not sure this would this would work as good here. The drag and therefore the work the motor has to do increases with the angle of flaps deployed. In any case this would only be useful for full up and full down.
In this case the motor has an internal stop so it doesn't use any power once it hits that stop.
VAF dues paid until 10/2019
RV7-A (N137MX Reserved) - Wings Started...
RV7-A - Rebuild Done - Flying!
Cessna Rocket 210HP - Best dang 172 Ever made! (sold)