N941WR
Legacy Member
Could someone who has hard wired their 396 or 496 give me some pointers.
The manual isn't so clear, thus my confusion.
The wire connecter is labeled in the following manor:
Red: DC Input
Black Ground
White: Alarm
Brown: Voice (+)
Orange: Voice(-)
Yellow: Port 1 in
Blue: Port 1 out
Green: Port 2 in
Violet: Port 2 out
Red & Black - I have those down, not a big problem. One question, the positive (red) wire has a fuse on it. Since I am wiring this to a breaker, do I still need the fuse?
Alarm: Is this for a warning light or is it a warning tone?
Brown & Orange: Is this a voice warning, such as the terrain warning. Thus it sounds like it can be wired into my intercom.
Yellow & Blue: ?
Green & Violet: ?
My -9 will not have an autopilot (at this time) but it does have a Dynon D100.
Here is a diagram of how I have my electronics wired:
This was drawn before I received the Garmin and I had no idea how that would connect into my system.
Also, how do you connect the XM radio into the system.
Thanks for the help!
The manual isn't so clear, thus my confusion.
The wire connecter is labeled in the following manor:
Red: DC Input
Black Ground
White: Alarm
Brown: Voice (+)
Orange: Voice(-)
Yellow: Port 1 in
Blue: Port 1 out
Green: Port 2 in
Violet: Port 2 out
Red & Black - I have those down, not a big problem. One question, the positive (red) wire has a fuse on it. Since I am wiring this to a breaker, do I still need the fuse?
Alarm: Is this for a warning light or is it a warning tone?
Brown & Orange: Is this a voice warning, such as the terrain warning. Thus it sounds like it can be wired into my intercom.
Yellow & Blue: ?
Green & Violet: ?
My -9 will not have an autopilot (at this time) but it does have a Dynon D100.
Here is a diagram of how I have my electronics wired:
This was drawn before I received the Garmin and I had no idea how that would connect into my system.
Also, how do you connect the XM radio into the system.
Thanks for the help!