Carl Froehlich
Well Known Member
A good friend and RV-8A driver, Tom Doran, came up with this slick cover. It needs a #8 nutplate on the arm rest and a #6 nutplate on the rear seat bulkhead. It shares a #8 screw on the top aft of the side panel cover.
Attached is a template I used to make this out of 0.032? aluminum.
Carl
Bolting stuff on for the last time.
Attached is a template I used to make this out of 0.032? aluminum.
Carl
Bolting stuff on for the last time.
![DF8301-EC-9-B9-D-41-B5-BB76-97-B10658-B3-C0.jpg](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2FgkDYhbdg%2FDF8301-EC-9-B9-D-41-B5-BB76-97-B10658-B3-C0.jpg&hash=3a65eb82e48b8e3408317e626a4c0bd5)
![A627541-C-E072-410-A-A69-A-5-B1-EB8-E6-C165.jpg](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2FdVfcRqfj%2FA627541-C-E072-410-A-A69-A-5-B1-EB8-E6-C165.jpg&hash=4815d7235e90a93d7fca623ac2f01b09)
![86577-E1-A-2044-4-B11-AF71-053-DD7413868.jpg](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2FVvfhQTTN%2F86577-E1-A-2044-4-B11-AF71-053-DD7413868.jpg&hash=ddc76612cc9e909af1f474746af579ea)