Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 11-15-2017, 12:15 PM
Iluke Iluke is offline
Join Date: Jun 2011
Location: Hope Valley, Rhode Island
Posts: 117
Default Pictures of your fuse and switch module?

Would any of you -12 builders who is far enough along do me the favor of shooting a couple of close-up photos of your fuse and switch module? I'm building a -7 and would like to do something similar for my panel. Van's apparently isn't selling your very cool but proprietary module to non-12 builders, so I'll have to "clone" it myself. Some good, close-up photos would help very much.
Ivan Luke
Hope Valley, RI
In the finish kit phase
2018 dues paid
Reply With Quote
Old 11-15-2017, 08:01 PM
waterboy2110 waterboy2110 is offline
Join Date: Jul 2010
Location: SF Bay Area
Posts: 244

The switches are mounted to a circuit board which I assume provides the power for the LEDs. The board interfaces with the central wiring hub which can be seen in the schematic that you’ll find at Vans. The switches can be bought from vans or other sources. I bought a couple for my pitot heat. I would agree that it is a proprietary system.
Instrument Rating
A&P / Rotax iRMT 9 Series Maintenance
RV12 Flying.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 09:23 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.