VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-01-2017, 09:53 PM
MrSparkle MrSparkle is offline
 
Join Date: Sep 2017
Location: San Antonio, Texas
Posts: 1
Default Rotax 912 200hr Carb Removal & Inspection

Approaching 400 hours which means a 200 hour maintenance/inspection. One item is the removal and inspection of the carbs; is the intent to fully or partially disassemble the carburetors?

If the carbs are to be disassembled, I don't feel comfortable doing this (actually I'm okay taking them apart, its the putting back together that gives me pause) and would appreciate suggestions on who I can trust with this work. Both positive and negative experiences would be appreciated, also shipping advice.

Thanks in advance for your replies.

__________________
Ian Heritch
San Antonio, Tx

RV-12, N417E, Randy Pflanzer's Red Venom 2
Reply With Quote
  #2  
Old 12-02-2017, 07:12 AM
h&jeuropa h&jeuropa is offline
 
Join Date: Jun 2008
Location: Kalamazoo, MI
Posts: 185
Default

I use Leading Edge Airfoils and have been very satisfied.

After I took the class there and saw what they do including removing all the plugs in the castings and reinstalling them with epoxy, I decided I'd rather have someone who rebuilds these carbs everyday and has all the cleaning equipment do it, not me. They will also incorporate any of the running changes.

Jim Butcher
Rotax 914
Reply With Quote
  #3  
Old 12-02-2017, 11:48 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,132
Default

I used a west coast maintenance center for ROTAX. They swapped my choke modules which made starting almost impossible. I took everything apart myself to find their screw up and fixed it. Just because you deal with a big name donít expect theyíll get it right. Next time Iíll use Lockwood for overhaul.
Reply With Quote
  #4  
Old 12-03-2017, 09:13 AM
Jetguy's Avatar
Jetguy Jetguy is offline
 
Join Date: Aug 2008
Location: Texas, Fort Worth
Posts: 1,220
Default

I second Lockwood Aviation. They have done my 5 times over the years.
Hint: Remove the throttle arms, with the cables connected, from the carbs. Leave them in the airplane. That way it will be close when re-sinking the carbs when you reinstall them. Furthermore you can remove the choke arms to, but there is a special trick to that maneuver.
__________________
John
RV12 N1212K
Flying Since June 2010
1020 Hours as of 9/30/2017
Jetguy@att.net
RV14 Wing, arrived and building at Rdog's new Hanger at 16X
S/N 140014
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:08 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.