VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #21  
Old 01-19-2013, 06:56 AM
Don's Avatar
Don Don is offline
 
Join Date: Jan 2005
Location: Richmond, VA
Posts: 696
Default

I purchased aluminum vents from Affordable Panels when I bought the panel. My recollection is there's a respectable discount when you buy both at the same time. The 9A I'm flying now has the plastic vents and they leak a little but it isn't bad enough for me to worry about. The 9A I'm building will have the aluminum vents.

As for weight, the two plastic ones weighed 2.4 and 2.5 ounces, and the aluminum vents were both 3.3 ounces. It a bit less than a 2 ounce increase in weight and I'm trying to watch every ounce.
__________________
Don Alexander
Virginia
RV-9A 257SW Purchase Flying - O-320, Dynon D100
RV-9A 702DA (reserved) Finish Kit IOX-340
www.propjock.com
Reply With Quote
  #22  
Old 11-24-2017, 09:36 AM
timotb timotb is offline
 
Join Date: Jul 2014
Location: SE Ohio
Posts: 30
Default vent caps

As we all know now, the cheap plastic air vents supplied by van's kits leaks air bad. After stuffing the inlets with plastic bags, then rubber banding cellophane on the inside, this year I found a good solution...besides replacing them will aluminum retrofits.

Prescott_Plastics_LLC sells 1 3/4" Black Vinyl Round End Cap 1.75 Rubber Cover Pipe Tubing Stopper that fits perfectly. Can install and remove by hand. After a test flight, they stayed in place.

Found mine on ebay. 4 caps for $7 including shipping.

https://www.dropbox.com/s/3ij38o96tw...56.25.jpg?dl=0

Last edited by timotb : 12-07-2017 at 10:01 PM. Reason: ebay links not allowed on VAF
Reply With Quote
  #23  
Old 11-25-2017, 07:17 PM
mikerkba mikerkba is offline
 
Join Date: Sep 2008
Location: Ely, Nevada
Posts: 134
Default Stein vents

I have used Stein vents, and been totally satisfied. Never saw the better metal ones sold at a major aircraft wood/parts place, so can't speak to them.

I think I can say this because they are an advertiser here: Stein Air has their large and small vents on a major price reduction sale online this weekend.

If this can't be left as a post (commercial ad rules for non-advertisers), I'll take it down immediately.
__________________
Mike Coster
BUILDER: N92MB RV7A (A/W 3/2009) - Sold
ADOPTED/reworking: N4032Q RV8A (8/2017)
KELY/Ely, NV
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:25 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.