Largest individual part in the RV-14A kit
I need to size a spray booth for priming my parts and I'm trying to determine what is the largest part in the airframe kit.
A quick review of the plans and it seems to be either the main spars, the top outboard wing skin or aft fuse top side skin in the tail cone.
I see that the main spars are already clear anodized, so perhaps that's good enough and priming isn't necessary.
I have the empennage kit, so I can get the measurements on that myself. How long/wide are the other parts?
RV-14A Kit#140433, N393AJ Reserved
Completed: Vertical Stab/Horizontal Stab
Working on: Empennage (Elevator)
Construction log - mykitlog.com/ajackson
Dues paid on 10 October 2018
Member of EAA Chapter 92
Pet peeve: "Lose" is the opposite of "find". "Loose" means "not tight".