VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 11-07-2017, 10:12 AM
RyanB RyanB is offline
 
Join Date: Sep 2017
Location: South Africa
Posts: 13
Default Another HS skin question

Hi Guys

Just about to rivet the skins to the HS and my brain has started smoking again. The instructions now instruct me to trim the skins, and this is done (according to the manual) by trimming the skin flush to the aft section of the tip rib but not the forward section as a fiberglass tip must be riveted to this.

Firstly from what I understand there is no fiberglass that rivets to the HS, only the elevators and secondly on the plans it looks like the skin is trimmed flush to the flange on the tip rib as well as the root rib. Obviously there is overhang on the trailing edge.

I hope this makes sense

Thank you

These **** newbies :-)

Extract from the Manual

‘When drilling is complete, remove the skins and debur all the holes in both the skin and the skeleton. Trim the skins to the preliminary trim line and debur the edge. See section 5 for tips on deburing. The outboard ends of the skins can be filed flush with the aft section of the tips after riveting. Be sure not to cut or file away the forward section! The fiberglass tips must rivet to that.’
Reply With Quote
  #2  
Old 11-07-2017, 06:16 PM
arffguy arffguy is offline
 
Join Date: Jan 2005
Location: Elk Grove, CA
Posts: 340
Default Error in RV-4 manual

I believe you are absolutely correct. I think that the particular wording in the manual was put in when the manuals were rewritten for all the earlier RV's. The RV-4 is the only model where the horizontal stabilizer does not have fiberglass tips mounted to it.
__________________
Mike F
RV-6A wings/fuselage
RV-3 empennage (extra thanks to Mr. Zilik)
RV-4 Plans only S/N 2938
Cessna 152
Elk Grove, CA
VAF #744 Exempt but paid in Feb anyway
Reply With Quote
  #3  
Old 11-07-2017, 07:50 PM
RyanB RyanB is offline
 
Join Date: Sep 2017
Location: South Africa
Posts: 13
Default

Thank you arffguy, maybe a mistake overlooked from the 3 which didn’t have the balance tabs
Reply With Quote
  #4  
Old 11-08-2017, 07:58 PM
NorthernRV4's Avatar
NorthernRV4 NorthernRV4 is offline
 
Join Date: Mar 2013
Location: Prince Edward Island, Canada
Posts: 110
Default

The skin is definitely trimmed flush with the outboard edge of the Tip rib flange. Reference the drawings, the manual is a loose set of instructions. The -6 is very similar but the forward 1/3 or so of the fibreglass tip is fixed to the H/S, the rest aft is fixed to the elevator and mass balanced. The -4 has the entire tip on the Elevator.
__________________
2017 VAF dues happily paid, Thanks DR!
Reply With Quote
  #5  
Old 11-08-2017, 11:03 PM
RyanB RyanB is offline
 
Join Date: Sep 2017
Location: South Africa
Posts: 13
Default

Thank you Northern
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:26 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.