VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 03-02-2018, 06:14 PM
OrenAir OrenAir is offline
 
Join Date: Jan 2017
Location: Chantilly, VA
Posts: 86
Default 10-16 confusion

On 10-16, I dimple the pilot hole, then do some drilling, then I dimple all the rest of the holes. Why was the pilot hole its own step?

Also, when it says fill the pilot hole with a rivet, I just put one in and tape over it, or am I crushing a rivet on a single skin? (Sorry for the beginner questions).
Reply With Quote
  #2  
Old 03-02-2018, 10:22 PM
HAL Pilot's Avatar
HAL Pilot HAL Pilot is offline
 
Join Date: Nov 2015
Location: Las Vegas NV
Posts: 70
Default

The Pilot hole is not used on the tri gear version and enlarged on the tail dragger version. So to clean it up you dimple and squeeze a rivet in the hole assuming you have a tri gear. You can dimple all the holes at the same time I believe. I did
__________________
Pete

RV14A Tail kit build in process
RV 14 WIKI in process, residing on Drop Box

https://www.dropbox.com/sh/xu5p6f4l7...bU0ck0pJa?dl=0

---For Edit Access drop me a PM with your Email address.
EAA 1300
Donation Paid 2018 (Military exempt) Cause its worth it.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:46 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.