VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 02-21-2018, 07:27 AM
yankee-flyer yankee-flyer is offline
 
Join Date: Jun 2009
Location: Dayton, OH
Posts: 838
Default SB18-02-03 question

Looking at the drawings raises a question. If we dimple part HS1226B do we not also need to dimple the part behind that so it will fit snugly? And the part behind that? and...

Wayne 120241
Reply With Quote
  #2  
Old 02-21-2018, 08:54 AM
Jim T Jim T is offline
 
Join Date: Jan 2005
Location: Independence, OR
Posts: 200
Default

Quote:
Originally Posted by yankee-flyer View Post
Looking at the drawings raises a question. If we dimple part HS1226B do we not also need to dimple the part behind that so it will fit snugly? And the part behind that? and...

Wayne 120241
I think that the machine countersinking that you do in Steps 14 & 15 the care of that.

Jim
__________________
RV-12 kit no.: 120647
Working on finish kit
http://www.mykitlog.com/JimT

2006 Rans S-6S Coyote (flying)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:06 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.