GRT EIS4000 Nuisance trips

Have ground run my rebuilt O360 with dual EFII about an hour and still getting lots of warning light trips. At this point I don't care about leaning, or EGT spread as I can add those features later hike flying as I gain experience. What are safe or better yet, wise numbers to use to avoid triggering warnings on EGT/CHT?
Ron Burnett

You can set EGT to infinity if you wish. The numbers are relative, not absolute, so there is no need for a warning.

If you're debugging, I'd set the CHT limits at 425 (at least), maybe 450. I don't like warnings that tell me things are getting close to being bad. I depend on my scan for that. I want warnings for when things DO get out of limits.