VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 10-12-2017, 08:13 AM
Rbb469 Rbb469 is offline
 
Join Date: Jul 2014
Location: 2M8
Posts: 24
Default

Thanks for all your input guys! Great info!


Quote:
Originally Posted by ronschreck View Post
The T-handle does not have to protrude through the instrument panel. You can use a Bowden cable or similar flexible cable to route the T-handle to any other place in the cockpit. This is a relatively easy mod to do on a finished airframe.
Do you personally know anyone that has used this flexible cable set-up? Contact info?

Thanks,
Ricky
__________________
Paid 5/2017
Reply With Quote
  #12  
Old 10-12-2017, 09:39 AM
pazmanyflyer's Avatar
pazmanyflyer pazmanyflyer is offline
 
Join Date: Jul 2007
Location: Litchfield Park, AZ
Posts: 732
Default Option 2

Here is what I did with my 7 tip-up.

I wanted to keep the sub-panel and handle but did not want it to go forward and thru my panel so I went vertical with a down tube to the bottom of the sub-panel where it is still easily accessible. I'll be adding a red knob at the bottom like the canopy release knob.

https://get.google.com/albumarchive/...h55IOz6h_c3yNI



__________________
Carlos in Arizona
Wittman Tailwind W8 N53CH (built & sold)
Pazmany PL-1 N2029 (bought & sold)
RV7 - N537TC (reserved & building)
Emp & Wings done - working on fuselage - finish kit received

"The air is an extremely dangerous, jealous and exacting mistress. Once under the spell most lovers are faithful to the end, which is not always old age." - Winston Churchill
Reply With Quote
  #13  
Old 10-12-2017, 09:46 AM
caryr's Avatar
caryr caryr is offline
 
Join Date: Jan 2005
Location: northwest georgia
Posts: 286
Default

I would wonder what happens to the lift strut bolt and connections, if one were to deploy the canopy.

Probably one would sheer before the other and the canopy would hit you in the head.
__________________
Cary Rhodes
Taylorsville, Georgia
N203CR
Van's RV-7
First Flight April 2004
Reply With Quote
  #14  
Old 10-12-2017, 10:03 AM
Rbb469 Rbb469 is offline
 
Join Date: Jul 2014
Location: 2M8
Posts: 24
Default

Quote:
Originally Posted by pazmanyflyer View Post
Here is what I did with my 7 tip-up.

I wanted to keep the sub-panel and handle but did not want it to go forward and thru my panel so I went vertical with a down tube to the bottom of the sub-panel where it is still easily accessible. I'll be adding a red knob at the bottom like the canopy release knob.

https://get.google.com/albumarchive/...h55IOz6h_c3yNI



Looks great and thanks for the pics. Did you install this during the build or after it was flying? Also, did you have to cut the skin above the hinges?

Thanks again,
Ricky
__________________
Paid 5/2017
Reply With Quote
  #15  
Old 10-12-2017, 12:34 PM
von_flyer von_flyer is offline
 
Join Date: Oct 2014
Location: Metamora, Michigan
Posts: 105
Default

Great info. I too have considered doing an 'after the fact' canopy release install not for an IAC requirement or acro/parachute reason but mainly for a water landing. Every RV water landing I have seen online ends upside down in the water. Jettisoning the canopy before impact or even in the water, seems like a good way to increase my chances of quick egress in the water.

Does this sound like appropriate logic?
__________________
John von Linsowe

Michigan
RV-7
Cessna 140
Reply With Quote
  #16  
Old 10-12-2017, 01:32 PM
Snowflake's Avatar
Snowflake Snowflake is offline
 
Join Date: Oct 2009
Location: Victoria, BC, Canada
Posts: 2,898
Default

Quote:
Originally Posted by caryr View Post
I would wonder what happens to the lift strut bolt and connections, if one were to deploy the canopy.
The caps could be popped off the pins while the canopy is closed, and before you pull the handle.
__________________
Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
Reply With Quote
  #17  
Old 10-12-2017, 04:02 PM
nilberg nilberg is offline
 
Join Date: Dec 2012
Location: Katy, TX
Posts: 111
Default

Quote:
Originally Posted by pazmanyflyer View Post
Here is what I did with my 7 tip-up.

I wanted to keep the sub-panel and handle but did not want it to go forward and thru my panel so I went vertical with a down tube to the bottom of the sub-panel where it is still easily accessible. I'll be adding a red knob at the bottom like the canopy release knob.

https://get.google.com/albumarchive/...h55IOz6h_c3yNI



I think that is an elegant solution. Unfortunately the GTN needs to go through the area and interferes with the vertical rod.
Reply With Quote
  #18  
Old 10-12-2017, 06:47 PM
KatanaPilot KatanaPilot is offline
 
Join Date: Feb 2015
Location: Locust Grove, GA
Posts: 260
Default

Quote:
Originally Posted by nilberg View Post
I think that is an elegant solution. Unfortunately the GTN needs to go through the area and interferes with the vertical rod.
Exactly our issue as well. I was hoping for pictures of how someone modified the Van's canopy release and connected a Bowden cable to the actuator arm. We have some general thoughts as to how to implement this, but I'm always happy to copy someone else's good ideas.

Anyone have pictures of a cable operated release?
__________________
Krea Ellis

Locust Grove, GA
DA20-A1 Katana "Princess Amelia"
RV-7A under construction
RV-10 under construction
2016 Donation made
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:43 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.