VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-9/9A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-04-2017, 11:33 AM
ssturges ssturges is offline
 
Join Date: Oct 2014
Location: Portland, Oregon
Posts: 12
Default Vans IO-360 Mixture bell crank on an IO-320

I got the drawing from Vans for the IO-360 throttle/mixture cable (drawing OP-22) which I did not see included in my FWF IO-320 kit. It has a bell crank to reverse the direction of the mixture which allows you to avoid cutting and making a big bump out in the cowl. Has anyone tried to use the vans parts on an IO-320? The drawing is a little difficult to tell were the bell crank pivot mounts and how that might be different between the IO-320 and IO-360. I have never seen that talked about here. It would nice to avoid the time in doing the trial and error mod to the cowl.
Reply With Quote
  #2  
Old 10-05-2017, 01:03 PM
RV9A Bill RV9A Bill is offline
 
Join Date: Aug 2008
Location: Lawton, OK
Posts: 249
Default Vanís mixture control from io360 on io320

Surprised this hasnít been answered. I have an io360 in my 9A. I would be surprised at any difference in the mixture control between the two. Someone who know more may step in here.
RV 9A Bill
__________________
RV9A Bill
RV9A 789BT flying
Reply With Quote
  #3  
Old 10-05-2017, 01:19 PM
airguy's Avatar
airguy airguy is offline
 
Join Date: Oct 2006
Location: Garden City, Tx
Posts: 3,886
Default

I built my own brackets and changed cable routing to avoid using a bell crank. My 9A has an IO360 with Superior cold sump and forward facing Bendix injection.
__________________
Greg Niehues - VAF 2017 dues paid
Garden City, TX
N16GN flying! http://websites.expercraft.com/airguy/
Built an off-plan 9A with too much fuel and too much HP. Should drop dead any minute now.
Reply With Quote
  #4  
Old 10-06-2017, 09:19 PM
JohnInReno's Avatar
JohnInReno JohnInReno is offline
 
Join Date: Jun 2005
Location: Prescott Valley/Chandler AZ
Posts: 252
Default

My engine builder purposely ordered a "reversed" mixture control for the injector body. The lever is above the intake and no bell crank needed. This is for a vertical induction IO-320.
__________________
John Morgensen
RV-9A N946PM 500+ hours since 2013
Nevada/Arizona
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:00 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.