Originally Posted by Gandalf
I am trying to install the oil reservoir and the factory installed "clamp" at the upper end of the reservoir needs to be rotated about 45 degrees. Can someone tell me if it is OK to loosen this clamp and rotate it... and if there is a torqued setting when reinstalling the clamp?
I believe you are talking about the clamp that holds the top and bottom of the tank together. It is OK to rotate this as necessary. In fact, once you have securely mounted the tank itself to the firewall the eaiest way to rotate the top to properly orient the oil hoses is just that. You will also need to rotate the top occasionally in the future if you reroute oil hoses for instance, such as when you install an oil thermostat. Same for periodic tank cleanings.
John Peck, CFII, A&P, EAA Tech Counselor, Flight Advisor.
RV-12 N37JP 120176 Flying since 2012.
VAF paid through 10/2018. Best bargain in town.