VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 09-18-2017, 01:32 PM
bkervaski's Avatar
bkervaski bkervaski is online now
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 444
Default Panel Install

At what point are you guys laying in your panels and installing behind-the-panel equipment?
__________________
#140376 RV-14A QB IO-390 Thunderbolt
Reserved: N196
Progress: Finishing Kit

Last edited by bkervaski : 09-18-2017 at 01:36 PM.
Reply With Quote
  #2  
Old 09-18-2017, 03:18 PM
Tom Martin Tom Martin is offline
 
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,306
Default

Basically the last thing that I did.
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger flying #153

Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
Reply With Quote
  #3  
Old 09-18-2017, 06:25 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 478
Default

I'm doing it now, with the canopy frame complete but no canopy in yet. I want to get all the pieces placed and wiring runs located, then close up the forward canopy skin. The proceed on with the canopy. Some of the rivets up under the forward skin can't be shot (by me) with the canopy in place. I'd like the front buttoned up. A lot of people say close that front skin last, but too much interference/rework I think if I don't get it done earlier.

Right now with the canopy frame on I can see how it overlaps the sub-panel, get in to put some nutplates for screwing boxes down, and place all the pieces so that I'm not surprised or upside down doing it later.
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:42 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.