Electrogunner
Well Known Member
I've installed a Tru trak sorcerer in my RV10 with the G900x. Going through the ground setup procedures, I do not have the LAT TORQUE in the setup menu after the LAT ACTIVITY menu. So I believe it is set way low wherever it is because I have no lateral movement in the controls, although if the AP is on and I manipulate the controls I can feel the roll servo slipping as though it is trying to move them. With the AP off the controls are free with no roll servo interference. The pitch servo is working correctly. Of course Tru trak is closed today.
Also I have no VRT Touque selection as well
Also I have no VRT Touque selection as well
Last edited: