I started this yesterday
The system is designed and took about 5 hours of design time to date and about 3.5 hours to build the torque linkage shown.
I need to design the cover and the electric circuit and find out if it can be linked to the Skiview.
I estimate about 20 to 30 Hours to add this feature
If anyone could measure the distance between and the height of the seat cushions it would be a big help.
Originally Posted by Bill_H
If you built up some kind of console between the seats and going forward to the panel, you could maybe mount a servomoter inside and add a linkage that would take the place of the flap handle, leaving the flaperon mixer "alone." I think you would be spending at least dozens to a couple hundred hours + in design and fabrication though.
Simpler would be to maybe leave the flap handle area alone and mount a piper-style throttle quad under the panel.