RV 12 FALSE ALARMS WHEN TURNING MASTER ON

I recently purchased a flying RV12 and have no issues of any kind until yesterday.

When I turned on the master switch four alarms appeared on the Dynon Flightdeck D 180.

1. DSAB: NETWORK CONFIGURATION ERROR
2. THIS: LOW EGT 2 ALARM
3. THIS: LOW EGT 1 ALARM
4. THIS: CONTACT SPAR ALARM

Studied the Flightdeck manual and DSAB talks about setting the time etc

Did not do anything between prior flight with no alarms and this flight with four alarms.

Looking for ideas to troubleshoot the problem

There is a setting to disable alarms for the first 5 minutes. Make sure that feature is turned on.

Mich48041 said:

There is a setting to disable alarms for the first 5 minutes. Make sure that feature is turned on.

Click to expand...

Ha!! I have to go look for that. Every time I turn on the master I get low EGT, low oil pressure, yadda yadda yadda. It's just a minor annoyance, but along with the 496 nagging me it's a lot of unnecessary button pushing.


Edit: After re-reading this, it occurs to me just how spoiled we are!!