Jim P
Well Known Member
Well, timing is not optimal. I scoped the cylinders after compression check today and found some vertical scoring in the cylinder walls on #1 and #3 with 600 hrs since new. Compression is 74/80 on both and oil consumption has been about 1qt/8-10 hours. I'm wondering about a bad ring that's moving around a bit. I have some carbon build up on pistons, any possibility it's just carbon getting caught by the wall? Thoughts?
And I've review this thread as well: http://www.vansairforce.com/community/showthread.php?t=112722&page=4
Here's #1: https://1drv.ms/u/s!Al5IppCB40wPg4BOajpH2AcctBEdAA
And #3: https://1drv.ms/u/s!Al5IppCB40wPg4BQe1D2Tm4HVc0bUA
And I've review this thread as well: http://www.vansairforce.com/community/showthread.php?t=112722&page=4
Here's #1: https://1drv.ms/u/s!Al5IppCB40wPg4BOajpH2AcctBEdAA
And #3: https://1drv.ms/u/s!Al5IppCB40wPg4BQe1D2Tm4HVc0bUA
Last edited: