erich weaver
Well Known Member
Greetings
Going to bite the bullet and replace my 7-row, baffle mounted oil cooler with a 13 row one that will be installed on the engine mount. Can someone recommend a suitable flange for attaching the scat tube to the engine baffle?
I'm thinking 4 inch diameter scat tube should be used, and I don't see where ACS carries a flange that size. Ideally I would want the flange to provide a bit of a curved radius transition to enter the tubing but maybe that isn't all that important, and not sure something like that is available.
Thanks
Erich
Going to bite the bullet and replace my 7-row, baffle mounted oil cooler with a 13 row one that will be installed on the engine mount. Can someone recommend a suitable flange for attaching the scat tube to the engine baffle?
I'm thinking 4 inch diameter scat tube should be used, and I don't see where ACS carries a flange that size. Ideally I would want the flange to provide a bit of a curved radius transition to enter the tubing but maybe that isn't all that important, and not sure something like that is available.
Thanks
Erich