rightrudder
Well Known Member
I've got an IO-320 D1A (160 hp) with a Catto 70x70 2-blade prop. What static rpm should I see at full throttle?
I just recently ran the engine for the first time and did a few seconds at full throttle. I only saw 1510 on the tach, but I suspect a tach calibration issue, as the engine was pre-run in a test cell at Lycoming.
I just recently ran the engine for the first time and did a few seconds at full throttle. I only saw 1510 on the tach, but I suspect a tach calibration issue, as the engine was pre-run in a test cell at Lycoming.