pastranafan5
Active Member
What are your favorite products from this company and why? I'm going to buy some stuff and want to know what all I should get.
Is that zinc chromate?
I had the oversize washers then decided to remove them. They require even longer bolts.
I recommend going back to the washers. Even though they do require longer bolts, the load is spread much more evenly.
What are your favorite products from this company and why? I'm going to buy some stuff and want to know what all I should get.
Gerry: Are you and I the only guys who bought the Pulse oximeter? Dan from Reno
Love the almost a 14 and nose job mods, and also make use of the prop wrench. I got the gust lock too but sold it in favor of exterior gust locks. I found it a little bit awkward and more importantly, you have to get into the plane to take it off and then get out again to do your pre-flight. That bugged me. Always great service from Alan.
Erich
Bought the gust lock from Erich. I don't use it often (most of my flights are lunch hops on calm days) but it's great to have for those overnighters.
[/QUOTE]that's secure but I didn't see any cracks before. when I look at this area my heart says yes but my mind says why? I hate it when that happens.
Anti-spat products:
1. nose job
2. prop wrench
3. oil wrench
4. gust lock
I don't plan on a lot of grass strip landing ... but I'm going to feel a little better about them now. Nothing is a guarantee against a really bad landing though.
Had a little issue with the hardware that came with the brace.... but a quick note to Allen and new hardware was in the mail.
OIL COOLER SHUTTER, with a push pull Bowden cable to cockpit. Very nicely machined product!