VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-30-2017, 05:54 AM
Rob H Rob H is offline
 
Join Date: Jan 2016
Location: Knoxville, IL
Posts: 91
Default New iS fuselage delivery

If I missed a thread, I apologize. If I recall, my crate date for the new style fuselage kit was November 27. Iím not in a hurry to receive it yet, but just wondering if anyone has gotten theirs yet, or if crating is a bit delayed? I havenít heard from mothership. If you have received your new fuse kit, what are your initial impressions? Thanks
__________________
RV12 - building
Empennage finished
Wings finished
iS Fuselage in progress
ULS Fuselage kit - SOLD


Farmer - corn & soybeans
Firefighter
2018 Dues Paid
Knoxville, IL
Reply With Quote
  #2  
Old 11-30-2017, 06:04 AM
LettersFromFlyoverCountry's Avatar
LettersFromFlyoverCountry LettersFromFlyoverCountry is offline
 
Join Date: Jan 2005
Location: St. Paul, MN.
Posts: 4,719
Default

I got mine two weeks ago. I ordered it the day it was announced BUT I already had a fuselage order into the company and they converted me to the new one. So I was sort of already in the pipeline.

Have they charged the remainder of your credit card yet? It usually arrives about two weeks after that (a week to crate and a week to ship)
__________________
Bob Collins
St. Paul, MN.
Blog: Letters From Flyover Country
Almost ready to start the RV-12iS finishing kit. 480 hours in.

Builder log
Reply With Quote
  #3  
Old 11-30-2017, 08:30 AM
Rob H Rob H is offline
 
Join Date: Jan 2016
Location: Knoxville, IL
Posts: 91
Default

Thanks for the update, Bob, and yes I paid in full some time ago. I ordered my kit a bit later than you did as Iíd already taken possession of the old kit and had to get it sold. I was one of the unfortunate builders that got caught between the two kits. Had I known there was a new kit coming out, I wouldíve waited to order. Thankfully, it all worked out without hurting the pocketbook too much. Wishing you continued success on your build!
__________________
RV12 - building
Empennage finished
Wings finished
iS Fuselage in progress
ULS Fuselage kit - SOLD


Farmer - corn & soybeans
Firefighter
2018 Dues Paid
Knoxville, IL
Reply With Quote
  #4  
Old 11-30-2017, 09:37 AM
rv9builder rv9builder is offline
 
Join Date: Jan 2005
Location: Irvine, CA
Posts: 694
Default

I ordered mine on July 25, and they gave me an approximate crating date of November 13. I thought the date would probably slip when I ordered it, but Van's was right on time! The kit was delivered a few days before Thanksgiving. Here are my first impressions:

1. Lots of parts look similar to old parts, but they have slight differences. Parts that have changed (and there are a lot of them) have a different part number. For example, the F-1276 belly skin is now an F-01276-1 skin.

2. The fuel tank is included in the fuse kit, but the turtle deck and aft window aren't. Much of the instrument panel is missing, too. However, the handle to help you get in and out that goes on the panel is included.

3. The steps aren't included, but you can see the holes where they will probably attach.

4. The longerons are pre-bent, but they are not twisted and they still have to be opened 5.4 degrees.

5. The seats look different. No hinges on the seat pans and the seatback braces are more like the 7A and 9A. The control console that goes between the seats isn't part of this kit; it must be part of the finish kit.

6. Perhaps the biggest difference between old and new is the fuel system. The plans show both the iS and ULS options. The iS system is much more complicated than the ULS option. Lots of filters, multiple pumps, etc., but as a fellow RV-12 builder explained to me, thatís normal with a fuel injected engine (thanks, John!). The expensive stuff (pumps, filters, etc.) is in a different kit, but it is shown on the plans.

The new ULS fuel system is also different from the original. The gascolator and fuel shutoff valve are both in the back where the tail cone meets the baggage bulkhead. It's not indicated for either system how you shut off the fuel from the cockpit. The red knob that the original kits have isnít shown in the plans. Perhaps itís part of the finish kit.

That's what I've noticed so far, but I'm still doing inventory. Scott or anyone else, please correct me if my initial observations are wrong.
__________________
Mark
RV-12iS Fuselage
RV-9A Project: Sold

VAF donation made for 2018
Reply With Quote
  #5  
Old 11-30-2017, 10:53 AM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,754
Default

Quote:
Originally Posted by rv9builder View Post
I ordered mine on July 25, and they gave me an approximate crating date of November 13. I thought the date would probably slip when I ordered it, but Van's was right on time! The kit was delivered a few days before Thanksgiving. Here are my first impressions:

1. Lots of parts look similar to old parts, but they have slight differences. Parts that have changed (and there are a lot of them) have a different part number. For example, the F-1276 belly skin is now an F-01276-1 skin.

2. The fuel tank is included in the fuse kit, but the turtle deck and aft window aren't. Much of the instrument panel is missing, too. However, the handle to help you get in and out that goes on the panel is included.

3. The steps aren't included, but you can see the holes where they will probably attach.

4. The longerons are pre-bent, but they are not twisted and they still have to be opened 5.4 degrees.

5. The seats look different. No hinges on the seat pans and the seatback braces are more like the 7A and 9A. The control console that goes between the seats isn't part of this kit; it must be part of the finish kit.

6. Perhaps the biggest difference between old and new is the fuel system. The plans show both the iS and ULS options. The iS system is much more complicated than the ULS option. Lots of filters, multiple pumps, etc., but as a fellow RV-12 builder explained to me, thatís normal with a fuel injected engine (thanks, John!). The expensive stuff (pumps, filters, etc.) is in a different kit, but it is shown on the plans.

The new ULS fuel system is also different from the original. The gascolator and fuel shutoff valve are both in the back where the tail cone meets the baggage bulkhead. It's not indicated for either system how you shut off the fuel from the cockpit. The red knob that the original kits have isnít shown in the plans. Perhaps itís part of the finish kit.

That's what I've noticed so far, but I'm still doing inventory. Scott or anyone else, please correct me if my initial observations are wrong.
Looks like an accurate assessment Mark.

The fuel valve is now remotely controlled via a cable control which can bee seen just to the right of the throttle in a photo on the RV-12 WHATS NEW page
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
  #6  
Old 11-30-2017, 05:36 PM
Rob H Rob H is offline
 
Join Date: Jan 2016
Location: Knoxville, IL
Posts: 91
Default

Mark, thanks for your observations. Iím looking forward to it.
__________________
RV12 - building
Empennage finished
Wings finished
iS Fuselage in progress
ULS Fuselage kit - SOLD


Farmer - corn & soybeans
Firefighter
2018 Dues Paid
Knoxville, IL
Reply With Quote
  #7  
Old 12-01-2017, 04:21 PM
LettersFromFlyoverCountry's Avatar
LettersFromFlyoverCountry LettersFromFlyoverCountry is offline
 
Join Date: Jan 2005
Location: St. Paul, MN.
Posts: 4,719
Default



I was glad for the "0" before some of the old numbers. Made it easier to sort each part by number and make it super easy to find without having one big pile of parts named 1204-A-Z

I'm freaking amazed at how good the plans are and the parts fit together.

It's gotten to the point where I feel like I can just sit and have a beer and tell the parts what to do for the plane to go together and they'll do it. But maybe that's the beer.
__________________
Bob Collins
St. Paul, MN.
Blog: Letters From Flyover Country
Almost ready to start the RV-12iS finishing kit. 480 hours in.

Builder log
Reply With Quote
  #8  
Old 12-02-2017, 04:28 PM
Rob H Rob H is offline
 
Join Date: Jan 2016
Location: Knoxville, IL
Posts: 91
Default

I just received the email yesterday that the crate was to be picked up by the carrier yesterday. I should be seeing it next week! Christmas early for me.
__________________
RV12 - building
Empennage finished
Wings finished
iS Fuselage in progress
ULS Fuselage kit - SOLD


Farmer - corn & soybeans
Firefighter
2018 Dues Paid
Knoxville, IL
Reply With Quote
  #9  
Old 12-02-2017, 09:25 PM
awmuhs's Avatar
awmuhs awmuhs is offline
 
Join Date: Jun 2013
Location: Tucson, Az
Posts: 131
Default Finish kit

Anyone know when the finish kit will be available?
__________________
Alan Muhs
Tucson, Arizona
Dues overpaid December 20, 2017
RV12 Southern Arizona Teen Aviation: wings, empennage & tail cone completed. Fuselage 70% complete
RV10 flying since July 2014- 475hours as of May 2018
RV6A purchased and flying
Reply With Quote
  #10  
Old 12-05-2017, 08:29 PM
rolick22's Avatar
rolick22 rolick22 is online now
 
Join Date: Oct 2013
Location: Powell, OH
Posts: 109
Default iS fuselage

I received my iS fuselage kit about a week ago. Just finished the inventory. Here we go again, take two!!
__________________
_____________________________________________
David Rohrlick
PPSEL A&P
RV-12 Finished (Empennage, Fuselage(1st gen), and Wing kit)
Empennage finished (need to add the panel cut out)
Wings finished (need to add the left landing light)
iS Finishing Kit In work
iS Fuselage Finished
1st GEN FUSELAGE SOLD
Serial#12-0864
N864DR Reserved
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:39 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.