VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 07-13-2017, 12:40 PM
keith3125 keith3125 is offline
 
Join Date: Apr 2017
Location: Pocatello, Idaho
Posts: 3
Default SouthEastern Idaho RV-6A Project for Sale

Pre-punched RV-6A (began 1998 [Idaho = very dry climate]), empennage & wing kit (w/1 fuselage bulkhead). $2,200 worth of tools at current pricing, included with kit.

Empennage finished, stored in broad canvas hanging straps on wall (no mice, dirt, etc). Wings 90% finished (wing closing, flaps, ailerons remaining); fuel tanks sealed, tested, absolutely air-tight (both held 6" water column for a week; behaved like a barometer).

Includes AOA, landing lights in wings installed, plastic conduit for wiring in wings installed per Van's tech suggestions. Fuselage bulkhead finished.

Asking $3,900 TOTAL. (Tools alone, $1,100 - Kit alone $3,400) Photos available on request. Built by a detail-oriented engineer. Call Keith at (two 0 eight) two 5 one-72ninerone. Non-work email is chemengr625 at gee-male (but calling is better - I only check that email periodically).
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:39 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.