VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 07-16-2017, 10:35 AM
stifler stifler is offline
 
Join Date: Jul 2008
Location: England
Posts: 48
Default 0-320 parts required

Hi guys
I am overhauling my 0-320 E2A to a 160hp and I need pretty much most parts. The way I figure it, it will be better to source the parts from the U.S. can anyone recommend a supplier who can supply all of these parts and will ship to the UK.
Thanks
Steve
Reply With Quote
  #2  
Old 07-16-2017, 11:37 AM
A1AVIATON47 A1AVIATON47 is offline
 
Join Date: Apr 2008
Location: PHOENIX AZ.
Posts: 131
Default LYCOMING PARTS

BEST PRICES FOR LYCOMING PARTS, AIRPOWER INC. PH 888-682-6807
YOU WILL NEED H2AD PISTON AND HEAVEY PISTON PIN, THEY WILL KNOW IF YOU NEED ANYTHING ELSE, I THINK THERE IS A KIT . MIKE
Reply With Quote
  #3  
Old 07-16-2017, 01:23 PM
Jesse's Avatar
Jesse Jesse is offline
 
Join Date: May 2005
Location: X35 - Ocala, FL
Posts: 3,022
Default

+1 for AirPower.
__________________
Jesse Saint (Saint Aviation, Inc. - VAF Advertiser)
352-427-0285
jesse@saintaviation.com
RV Hotel (hangar, room, car) at X35 in north FL

Commercial ASEL/S A&P/IA EAA Technical Counselor

Dynamic Prop Balancing, Prebuy Inspections, Condition Inspections, Repairs and Mods, Injector Tuning, Airframe, Engine, Panel Upgrades, Ferrying, etc.
Reply With Quote
  #4  
Old 07-16-2017, 01:34 PM
jrs14855 jrs14855 is offline
 
Join Date: Apr 2008
Location: Lake Havasu City AZ
Posts: 1,968
Default Parts

H2AD piston can be used but it results in higher compression than the stock 160 hp piston.
Dart Aircraft in Waco TX is an excellent source for parts. If you buy new cylinders you get everything except the piston pins, rocker shafts and rocker arms.
Reply With Quote
  #5  
Old 07-16-2017, 01:51 PM
stifler stifler is offline
 
Join Date: Jul 2008
Location: England
Posts: 48
Default

Quote:
Originally Posted by jrs14855 View Post
H2AD piston can be used but it results in higher compression than the stock 160 hp piston.
Dart Aircraft in Waco TX is an excellent source for parts. If you buy new cylinders you get everything except the piston pins, rocker shafts and rocker arms.
Hi thanks for the reply, what HP does the H2AD Pistons push out? I was thinking of using superior cylinder kits.
Reply With Quote
  #6  
Old 07-16-2017, 02:04 PM
jrs14855 jrs14855 is offline
 
Join Date: Apr 2008
Location: Lake Havasu City AZ
Posts: 1,968
Default Pistons

IIRC Mahlon Russell estimates around 8 hp more than stock 160. I have 10-1 and it still is nowhere near 180 hp.
A stock 160 hp drops below 75% power at around 7000'. I seem to be able to pull 120 hp(75% of 160) as high as 9000'.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:27 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.