I?m a little confused by the statement in BOLD on 18-04
?Remember to dimple the opposite direction on the T-1005C & T-1005B shims for the right side of the aircraft?.
Please reference pictures below and areas denoted w/ blue outline.....
Other notes and highlights aren?t applicable .
It seems that if I have the Right Wing bracket oriented correctly in regards to the flange and bearing orientation to match the left wing as depicted on 18-06 and the shims placed to match the pre-drilled holes, then the dimples should correspond accordingly without regard to the direction of the dimples. Am I missing something in this statement?
Thanks
?Remember to dimple the opposite direction on the T-1005C & T-1005B shims for the right side of the aircraft?.
Please reference pictures below and areas denoted w/ blue outline.....
Other notes and highlights aren?t applicable .
It seems that if I have the Right Wing bracket oriented correctly in regards to the flange and bearing orientation to match the left wing as depicted on 18-06 and the shims placed to match the pre-drilled holes, then the dimples should correspond accordingly without regard to the direction of the dimples. Am I missing something in this statement?
Thanks