krhea
Well Known Member
I am upgrading my control stick to tosten Cs-8 and am confused about the digital input output wiring. I am adding the MGL n16-V16 radio and a CS-8 stick grip. I built a small schematic at this link:
https://www.dropbox.com/s/bp70rxmhbdipqm0/cs8%20stick%20.pdf?dl=0
I just cannot wrap my head around the ptt going to audio ground at the radio and the other ptt switchs grounding to power ground. Seems like i need to take the cs-8 apart and add another wire for the ptt trigger?
Thanks
Keith Rhea.
RV7
2019 dues paid.
https://www.dropbox.com/s/bp70rxmhbdipqm0/cs8%20stick%20.pdf?dl=0
I just cannot wrap my head around the ptt going to audio ground at the radio and the other ptt switchs grounding to power ground. Seems like i need to take the cs-8 apart and add another wire for the ptt trigger?
Thanks
Keith Rhea.
RV7
2019 dues paid.