I've just completed the installation of an ElectroAir 41000 and am having some troubles I'm not sure the cause. When running on just the EIS, the engine seems to lug, like the timing is way off. When switching from left mag to right EIS, the engine cuts out for a moment, then a backfire or two, then it starts running kind of OK. The engine runs on EIS only, but just not very good. Running on both Mag and EIS is a lot better.
I should also add that I have a rotary key switch for switching between mags.
The EIS was used and supposedly working fine when removed from the previous aircraft but I am having my doubts.
If anyone has any ideas, I'm listening. Otherwise off with the EIS, and back on with the mag that never let me down.
Scott
I should also add that I have a rotary key switch for switching between mags.
The EIS was used and supposedly working fine when removed from the previous aircraft but I am having my doubts.
If anyone has any ideas, I'm listening. Otherwise off with the EIS, and back on with the mag that never let me down.
Scott
Last edited: