I am relatively new to the Dynon Skview Classic and GTN 650W combo. I've recently completed phase 1 so I think it's safe to say I'm still a novice with these particular systems. My day job however has allowed me to log a few thousand hours behind a G1000 and at least one hundred precision approaches so I know what lateral and vertical guidance during an approach should look it. While attempting to fly an LPV in my -8 (in VFR conditions), I was not able to bring up vertical guidance on my Skyview PFD. I spoke with a Dynon representative who advised the Pathways need to be activated to do so. This doesn't exactly make sense to me as I'm talking about the vertical guidance (diamond) to the right of the HSI on the PFD. Plus, I don't particularly like to fly with the pathways activated. My HSI source is set to the Garmin and my lateral guidance works appropriately. I am hoping that someone out there has worked through this issue so I don't have to re-nvent the wheel, again...
Thanks in advance!!!
Thanks in advance!!!